Home » Dripgard
The majority of irrigation pump failures are due to inadequate oil lubrication of line shaft bearings.Dripgard can save you thousands of dollars and costly down time.
For pre-season lubrication, pump operator can manually open the oil valve, thus facilitating pre-lube of the pump line shaft without energizing the Dripgard
Supply voltage | 100 VAC to 240 VAC, 50/60 Hz |
Power consumption (max.) | 10 W |
Drip rate alarm settings | 3, 5, 8, 12, 15 dpm |
Pump Shutdown relay contact | 110 VAC – 5 A ; 250 VAC – 5A |
Alarm relay contact | 110 VAC – 5 A ; 250 VAC – 5A |
Oil on/off solenoid | 12 VDC (internal voltage) |
Drip volume | 32 drops per 1 cc |
Oil inlet/outlet | Male thread ¼” BSP |
Dimensions (W x H x D) | 8.58 x 8.00 x 3.54 inches (218 x 203 x 90 mm) |
Weight | 3.7 lbs. (1.7 kg) |
All specifications shown in this brochure are subject to change.Based on U.S. Pat. Number 5,996,739 & other countries