Solar Systems
3D Modeling & Drafting
Modular Skids Design
Detail Engineering
Factory Automation
Industrial Automation


Dripgard- oil lubrication protection device
Water Well Oiler that saves money!

The majority of irrigation pump failures are due to inadequate oil lubrication of line shaft bearings.Dripgard can save you thousands of dollars and costly down time.

  • Protects your irrigation turbine pump from running dry
    – Enables automatic pre-lube dosing before pump is turned on
  • Reduces oil consumption and prevents well contamination by dripping oil only when required
  • Controls external lamp/horn alarms
  • Compact device that is easy to install

Save money on:

  • Manpower time by reducing the number of visits to each well.
  • Fuel and vehicle maintenance.
  • Oil – drip oil only when required.
  • Line shaft repairs and downtime.

For pre-season lubrication, pump operator can manually open the oil valve, thus facilitating pre-lube of the pump line shaft without energizing the Dripgard

Dripgard Specification

Supply voltage100 VAC to 240 VAC, 50/60 Hz
Power consumption (max.)10 W
Drip rate alarm settings3, 5, 8, 12, 15 dpm
Pump Shutdown relay contact110 VAC – 5 A ; 250 VAC – 5A
Alarm relay contact110 VAC – 5 A ; 250 VAC – 5A
Oil on/off solenoid12 VDC (internal voltage)
Drip volume32 drops per 1 cc
Oil inlet/outletMale thread ¼” BSP
Dimensions (W x H x D)8.58 x 8.00 x 3.54 inches (218 x 203 x 90 mm)
Weight3.7 lbs. (1.7 kg)

All specifications shown in this brochure are subject to change.Based on U.S. Pat. Number 5,996,739 & other countries